DR5000-ADJ DCC Multi-bus central DIGIKEIJS

DIGICENTRAL

The first central with all imaginable connectors combined in one device. Clear LED displays and integrated USB, LAN and WIFI

Includes adjustable power supply (15 - 24 Volt)

DR5000 Multi-bus central features

Connection options:

Standard:

USB 
- Communication with computer/control program; 
- Protocol L.NET or XpressNet V3;
- Virtual COM-port, speed 9600, 19200, 38400, 56800 of 115200 Baud.
- Firmware updates

L.NET T
- Interface for L.NET devices (Controllers, Feedback modules etc.)

L-NET B
- Interface for L.NET devices: (manual-)Controllers, Feedback modules etc. Max 12v/1000mA power;
- Interface for L.NET devices including boosters (rail-sync). Max 12v/600mA power;

X-BUS/R-BUS
- Interface for XpressNet devices: MultiMaus, LH100 etc. Max 12v/1000mA power;
- Interface for R-BUS feedback modules.

B-BUS
- Interface for ROCO Boosters, e.g. the MultiMaus boosters 10764 lan as a booster together with the DR5000!

bereden

RS-BUS
- Interface for Lenz-RS-Bus feedback modules.

ext88N
- Interface for s88N feedback modules. Max 16 x 16 input modules (256 inputs);
- Interface for DR502xEXT modules (bi-directioneel).

Track-Output
- DCC rail-output. Max 19V/3.2Amp. Lower voltages by other power supply. Min 14V.

Program-Track
- DCC programming output. Max 19V/800mA. 
Automatically switches from Track-Out to Program mode so the programming rail can also be used.

LAN
- 100baseT Ethernet. Can be connected to a local network via DHCP.

WiFi/WLAN

- bgn Wireless network via internal antenna.
- Both networks can be accessed via UDP / IP and TCP / IP;
- Protocols: Lenz XpressNet and/or L.NET-TCP/IP;
- Wifi/LAN settings can be changed via a web-interface;
- The WiFi / LAN module can serve as an AP (access point) as well as a router between the DR5000 and WiFi home network (LAN).

Control:

Stop 
- Disable Rail output.

Go 
- Enable Rail output

IR-Throttle
- IR receiver compatible with Uhlenbrock IRIS and Piko DigiFern (or other RC5/36Khz remotecontrols).
- 4 channels, per channel directly to be controlled/switched, 1 lok and 4 switches.

- Further control possible through X-BUS and/or L.NET (manual)controls, 
the DR502xEXT modules or via the USB/LAN/Wifi interfaces.